Interface EIB/KNX Enocean, 32-Channel unidirectional, on-wall mounted housing

Interface between EnOcean and EIB/KNX Device KNX ENO 610 is shipped in a on-wall mounted housing, for operating the EIB/KNX has to be connected. To mount a device onto a recessed wall box an adapter plate is available. Purpose KNX ENO 610 acts as a gateway between EnOcean radio sensors and the EIB/KNX bus. It has 32 channels, each of which can be configured with one of the following functions: · Switch module touch sensor: - Switching (on/off/toggling/sending value) - Switching and dimming - Blind up/down · Temperature sensor with the following selectable options: - Presence key and switch - Set point control - Multiple contact switch - Humidity sensor · Window contact · Binary input · Light sensor · Motion detector Configuration The function of each channel is selected with the ETS software by parameter. Depending on the selected function the enocean telegrams are mapped to up to 6 communication objects. After programming the device with ETS the radio sensors can be learned. For that purpose two keys and a LCD are placed in the device. While learning a channel the LCD shows the actual channel number and assignment. Touch sensors can be configured as one-key control or as rocker. Up to 4 keys/rockers can be connected to one channel. If function ``Window contact`` is chosen as well up to 4 sensors can be linked with one channel. ``Window open`` is signaled via EIB/KNX, if at least one window is opened, ``Window closed`` is transmitted only, if all windows are closed. With functions for temperature, humidity and brightness chosen only one sensor per channel can be assigned.