Bidirectional-Gateway KNX-EnOcean (24 Channels)

The unit KNX ENO 632 serves as a bidirectional gateway between EnOcean radio devices and the KNX bus. With this device, commands and measured values of EnOcean wireless sensors can be transferred to the KNX bus, for example, to control KNX actuators. Also EnOcean wireless actuators can be controlled via KNX. For EnOcean sensors the device is based on the EnOcean Equipment Profiles (EEP). The implemented profiles mostly are specified in the data sheets of the sensors. For the control of EnOcean actuators corresponding EEPs are emulated.

This means, the gateway sends radio telegrams such as a push button or a window contact. In addition the gateway supports logical and control functions and has a radio repeater included.

Broad variety of functions and 24 channels

The KNX ENO 632 is organized in 24 channels. Each channel can be assigned to one of the following functions:

Link from EnOcean sensor to KNX:

• Switching and contact functions

  • Switching

  • Dimming

  • Shutter up/down

  • Scene

• Window contacts

• Window handles

• Key cards switches

• Pressure switches

• Temperature sensors

• Humidity sensors

• Light sensors

• Presence sensors

• Gas sensors

• Room control devices

• Automated counter devices

• Environmental sensors (weather station)

• Digital inputs

Mounting and connection

The mounting can be done on a wall surface (e.g. brick-work or wood). The mounting holes match for a 55 mm flush-mounted box. The power supply of the device is realized via the bus.

Configuration: KNX ENO Tool

The KNX ENO Tool software can be used to configure the Links between various EnOcean-Sensors and the KNX/EIB EnOcean-Gateway KNX ENO 626/630/632/6347636. The device configuration of the Gateway can be read, modified, exported and saved back to either the same or another Gateway. EnOcean Bus Monitor showing the EnOcean Telegrams send over the KNX Bus.